By Don Croft <terminator3@turbonet.com>
http://educate-yourself.org/dc/HHgandTBupdate26may03.shtml
May 26, 2003
Updated Sep 11, 2003
‘Cbswork’ in LA invited me to write a white paper
with him about gifting with orgonite, so I thought this would be a wonderful
opportunity to combine our two perspectives for your convenience. I constantly
strive to reduce this process to the most easily replicated methods and
he tends more toward the high technical end, so between us we can paint
a pretty accurate and panoramic picture of gifting with orgonite, I think.
A lot of what I’m about to describe came from what I’ve picked
up from our interaction with him over the past year. Of course, what Carol
and I started a couple of years ago is what gave him the impetus to contribute
to this global effort and to help us all expand its parameters.
To start, here’s how I make nearly all of my Holy Handgrenade
(HHgs) and Towerbusters (TBs) now:
Tower Buster
I started out making these in little 3oz paper cups, but after a
couple of thousand of those, I tried muffin pans and now I make most of
my TBs this way. The only reason I still make a few in paper cups is so
that I can shoot them out of the Spudgun, which I bought from www.spudtech.com
In a way, this non-lethal artillery piece is sort of like
a back scratcher: sometimes you just can’t get quite close enough
to the target to take it out with a single TB and this does the trick. Be
careful not to do what one of our fellow spiritual road warriors did, though.
He mistakenly (?) shot one into one of those big drum transmitters, right
through the drumskin .
I used the Spudgun exclusively in Chaco Canyon, on the Navajo
Reservation, because I didn’t want the secret police to find them
within throwing distance of the road. Cbswork will expand on the practice
of overgifting, which is often required in areas like Southern California,
where the satanic world order puts an awful lot of stock in their DOR infrastructure.
I’ll now go over the muffin tray method, which can be
applied to the paper cup method, of course:
1. I use non-stick muffin pans, but of course the resin
contracts as it cools, so even the cheaper ones work fine.
2. While you’re in Wicked WalMart getting those pans,
go to the craft section and get the mesh bags of tumbled rocks (the smaller
rocks). Pick out the quartz and other crystals.
Those are the ones that are semi-transparent and most of them are kind
of dirty-looking inside. The white ones are probably
marble, so don’t be fooled by them. You can get suitable quartz
crystals by the pound from Gladys Bridges at <crystals87@sbcglobal.net> or from other vendors but I mention WalMart to show you that it’s
not hard to find ingredients. I generally use small quartz
pieces, often broken ones, that are between a quarter and a half inch
long
3. Drop a small crystal in each muffin mold
4. Fill the molds almost to the top with loose metal.
5. Pour the resin in until it comes almost up to the top.
The mold holds 4oz of material by volume, but 3oz is sufficient for busting
most of the single transmitters you’ll encounter
or for turning the judgemental frowns of a chapel-full of vindictive churchgoers
upside down.
6. You can Hootenize the TBs if you wish and Cbswork likes
to use larger crystals around which can be wound 26.5” of wire when
he's taking out HAARP transmitters. If you, too,
are in a major metro area you might benefit from spending that time and
effort for at least some of your TBs, but we 'did'
Atlanta successfully with ordinary TBs made as I’ve just described
and the good effects are holding, several months after the
job was completed. The bad boys have been throwing every thing in their
poisonous arsenal except nuke bombs and Zyklon B at Atlanta from
the time we were there in March but the vibrant atmosphere still shrugs
it all off and the violent storms that were aimed at it earlier this month
stalled out when they reached the city.
7. When I’m going to toss out a bunch in town, I paint
them green and brown, just like the HHgs. You’d be surprised how
difficult these are to find once they’ve
been tossed.
Holy Handgrenade:
1. Fold a piece of typing paper twice [fold it from lower
corner to opposite corner to make a triangle shape, not a rectangle shape.
Fold it a second time to make another triangle shape..Ken] and then open
it into a cone shape. Tape the overlap and ‘underlap with masking
tape to help it hold its shape.
2. After you’ve shaped it into a cone, put the opened
cone upside down in a paper cup.
3. Cut a 26” length of 18 gauge copper wire and form
it into a cone spiral so that it fits loosely inside the paper cone(Cbs
says that 26.5" is better, as it grounds out HAARP carrier freq’s
[ I checked with Mr. E in Canada and he suggested that 27" might produce
even better results, but all three numbers will work ..Ken] ).
4. Put a big pinch of metal particles into the pointy end
of the cone, right on top of the little end of the copper spiral. I like
to use BBs (small, copper or zinc-coated ball bearings that American kids
shoot from air rifles) for these, but they’re very heavy and expensive
if you’re making a lot of HHgs and TBs.
5. Shove a fat crystal, point down, into the metal so that
it’s standing up, then put a little more metal around it to hold it
in place. I use very cheap, funky-looking crystals for this which have one
distinct end.. Save the nice ones for personal devices.
6. Now pour enough catalyzed resin [fiberglass
resin to which the liquid catalyst has already been added] in to cover the
metal.
7. I ‘Hootenize’ the ‘orgonite’ at
this point (orgonite is the combination of roughly equal volumes of catalyzed
resin and metal particles—Mark Hooten was the first to introduce other
mineral and crystal species to orgonite to enhance its performance; it’s
an optional process for this device) with bits of hematite, pyrite and garnets.
A spoonful of activated charcoal is a good idea, too, but also optional.
Gale Stark was the first to add activated carbon to the mix.
8. I hope you were careful to get metal through which resin
thoroughly soaks before it hardens; if not, you’ll need to mix the
metal and resin together and spoon that messy mix into the mold [I solved
the problem of the resin hardening too fast before it had thoroughly soaked
into the metal shavings by cutting the amount of catalyst recommended by
one half. This only works if your local temperature is above 70 degrees..Ken].
The sweepings from a machines shop are usually ideal. [I prefer using cleaner shavings from a scrap metal dealer ..Ken]
9. Fill to the brim with orgonite and when it’s hard,
it’s done. I paint them green and brown with spraypaint if I won’t
be burying them.
10. Notice that I’m not putting any additional crystals
in the mix. I simply found that using one bulky crystal in the point makes
the other ones extraneous [the original HHg design used 5 crystals]. I think
the coil is important in this case because it causes the orgone field to
spin.
All information posted on this web site is
the opinion of the author and is provided for educational purposes only.
It is not to be construed as medical advice. Only a licensed medical doctor
can legally offer medical advice in the United States. Consult the healer
of your choice for medical care and advice.